Polypropylene (PP) · Impact copolymer
PROPILCO 80C13NA
High-flow impact copolymer polypropylene for thin-walled packaging
- Melt flow rate
- 80 g/10 min
- Flexural modulus
- 979 MPa
- Izod impact
- 76 J/m
Description
High-flow impact copolymer polypropylene with an excellent impact/stiffness balance and tough weld lines. Contains nucleating and antistatic additives.
Recommended applications
- Thin-walled, fast-cycle injection-moulded articles
- Rigid packaging: ice-cream tubs and cups
- Housewares
- Industrial applications
Technical properties
| Property | Value | Unit | Standard |
|---|---|---|---|
| Melt flow rate (230 °C / 2.16 kg) | 80 | g/10 min | ASTM D1238 B |
| Maximum tensile strength (50 mm/min) | 18.9 | MPa | ASTM D638 |
| Elongation at yield (50 mm/min) | 5 | % | ASTM D638 |
| Flexural modulus, 1 % secant (1.3 mm/min) | 979 | MPa | ASTM D790 1A |
| Notched Izod impact strength (23 °C) | 76 | J/m | ASTM D256 A |
| Gardner impact (-30 °C) | 27.5 | J | ASTM D5420 A |
Type I specimens, 3.2 mm thick, injection moulded according to ASTM D4101-00. Typical averaged manufacturer values: for guidance only, not product specifications. Source: technical data sheet by Propilco.
More information
- Product status
- The manufacturer presents it as a development product, available for evaluation on request.
- Additives
- Nucleating and antistatic
- Food contact
- For food-contact articles, or articles to be sterilised or ozonised, an FDA certificate must be requested from the manufacturer.