Polypropylene (PP) · Impact copolymer (block)
PROPILCO 60C90ND
High-flow impact block copolymer polypropylene for thin-walled containers
- Melt flow rate
- 60 g/10 min
- Flexural modulus
- 1,203 MPa
- Izod impact
- 58.5 J/m
Description
High melt flow, controlled rheology impact block copolymer polypropylene; good impact/stiffness balance; tough weld line; with nucleating and mould release additives.
Recommended applications
- Injection moulding of thin-walled rigid containers
- Fast cycle times
- Injection moulding of general-purpose applications
Technical properties
| Property | Value | Unit | Standard |
|---|---|---|---|
| Melt flow (230 °C / 2.16 kg) | 60 | g/10 min | ASTM D1238-00 B |
| Tensile yield strength (50 mm/min) | 24.7 | MPa | ASTM D638-01 |
| Tensile yield elongation (50 mm/min) | 5.2 | % | ASTM D638-01 |
| Flexural modulus, 1 % secant (1.3 mm/min) | 1,202.8 | MPa | ASTM D790-00 1A |
| Notched Izod impact strength (23 °C) | 58.5 | J/m | ASTM D256-00 A |
| Gardner impact strength (-30 °C) | 12.3 | J | ASTM D5420-98 A |
| Gardner impact strength (23 °C) | 22.4 | J | ASTM D5420-98 A |
Type I specimens, 3.2 mm thick, injection moulded according to ASTM D4101-00. Typical averaged manufacturer values: for guidance only, not product specifications. Source: technical data sheet by Propilco.
More information
- Additives
- Nucleating and mould release
- Food contact
- For food-contact articles, or articles to be subjected to any kind of treatment such as sterilisation and ozonisation, an FDA certificate should be requested from the manufacturer.