Low-density polyethylene (LDPE) · Low-density polyethylene for film
Petilen F2-12
LDPE for extrusion of general-purpose and display packaging film
- Melt flow rate
- 2.1–3.0 g/10 min
- Density
- 0.918–0.922 g/cm³
- Haze
- 6.3 %
Description
Petilen F2-12 is a Petkim low-density polyethylene for film extrusion, intended for the production of general-purpose films and display packaging films. It is supplied as pellets.
Recommended applications
- General-purpose film
- Display packaging film
Technical properties
| Property | Value | Unit | Standard |
|---|---|---|---|
| Melt flow rate (190 °C / 2.16 kg) | 2.1 - 3.0 | g/10 min | ASTM D-1238 |
| Density at 23 °C | 0.918 - 0.922 | g/cm³ | ASTM D-1505 |
| Film quality | A | - | ALKATHENE 36 |
| Ash | 0.14 | wt% | ALKT-509 |
| Haze | 6.3 | % | ASTM D-1003 |
| Gloss | 70 | - | ASTM D-2457 |
Melt flow rate, density and film quality are guaranteed values; ash, haze and gloss are typical values (average of Petkim laboratory analyses), for information only and not guaranteed. Source: technical data sheet by Petkim.
More information
- Food contact
- Holds a Production Permission Certificate for plastic materials and articles intended to come into contact with foodstuffs, dated 12.08.2013, no. TR-35-K-017539, issued by the Ministry of Food, Agriculture and Livestock of the Republic of Turkey.
- Packaging
- Pellets, in 25 kg white PE FFS (form-fill-seal) bags or 1,400 kg big bags.
- Storage
- In closed, dry areas, sheltered from direct sunlight.